Devonconversions Aztec 2003

We do not have a photograph for Devonconversions Aztec The Devonconversions Aztec was manufactured by DevonConversions in 2003. This hightop motor home sleeps 2 and is based on a Ford chassis. Power is provided by a 2400 cc diesel engine.

Please note that this information is collected through our own research and details submitted by our kind users. The information should only be treated as a guide and not for any decisions relating to purchasing, legal or safety etc.

Quick resources for a Devonconversions Aztec

Devonconversions Aztec insurance quotesSecure motorhome storage

Devonconversions Aztec sizes

The information shows the sizes / dimensions for the motor caravan in a range of measurements to make the information as helpful as possible.

Spec Metres Centremetres Feet Inches
Length 5.651m 565.1 cm 18.53528 ft 222.47987 "
Width 1.974m 197.4 cm 6.47472 ft 77.71638 "
Height 2.65m 265 cm 8.692 ft 104.3305 "

Devonconversions Aztec weights

Weight Kgs CWT (hundred weight)
Unlaiden weight TBA kgs 0 cwt
Payload TBA kgs 0 cwt
Laiden weight TBA kgs 0 cwt

Devonconversions Aztec Features

Sleeping arrangements

The 2003 Devonconversions Aztec will sleep 2 people.

Travel arrangements

Food preparation and storage

Outside

Storage for two gas bottles

Gas storage

The Devonconversions Aztec has storage for 2 gas bottles. Many motorhomes use LPG to power ovens, fridges, heaters and water heaters when the motorhome is not connected to mains electricity






Note: where values are shown as 0 or TBA it's because we have not yet found the data for this motorhome. If we are missing any information or if anything is not correct please accept our sincere apologies. If you do find the correct information please do let us know link so that we can improve this page.

Images shown to illustrate the motorhome features are generic and not of this particular vehicle.

If you own one of these vehicles please could we ask a favour for you to send us a photo of your vehicle. We will remove the number plate from the image and resize all you need to to is email us the image. All we ask is that the image is taken by you and its your vehicle.Thanks